For non-Malaysian customers, are required to make purchase from NEX Instrument Inc website at
Fisher
Fisher
Sort by
Show result
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Fisher
  • Product No. : 3582i-03
  • Product type : Valve Positioner
  • Input Signal : 4 to 20 mA dc constant current with 30 V dc maximum compliance voltage, can be split range
  • Equivalent Circuit for Type 3582i : The Type 582i converter equivalent circuit is 120 ohms, shunted by three 5.6-volt zener diodes
  • Output Signal : Type: Pneumatic pressure as required by actuator up to 95 percent of maximum supply. Action: Field-reversible between direct and reverse within the pneumatic valve positioner.
  • Supply Pressure : Recommended: 5 psi (0.3 bar) above actuator requirement. Maximum: 50 psig (3.4 bar) or pressure rating of actuator, whichever is lower.
  • Pressure Gauges : 1-1/2 inch (40 mm) diameter with plastic case and brass connection triple scale (PSI, MPa, and bar) or dual scale (PSI and kg/cm2)
  • Pressure Connections : 1/4-inch NPT female
  • Electrical Connection for Type 3582i : 1/2-14 NPT conduit connection
  • Maximum Valve Stem Travel : 4-1/8 inches (105 mm); adjustable to obtain lesser travels with standard input signals
  • Weight : 3.6 Kg
  • Shipping weight : 5 Kg
RM14,710.00
  • Estimated Lead Time : 4 - 6 weeks.

  • Manufacturer : Fisher

  • Model No. : 630

  • Product type : 630 Big Joe High-Pressure Regulator

  • Body Sizes : 1-inch (DN 25) , 2-inch (DN 50)

  • Maximum Inlet Pressure and Pressure Drop : Up to 1500 psig (103 bar)

  • Maximum Outlet Pressure : Up to 500 psig (34,5 bar)

  • Pressure Registration : Internal

  • Spring Case Vent : 1/4-inch NPT screwed

  • Nitrile (NBR), Nylon (PA), and Neoprene (CR): -20

RM6,583.00
  • Estimated Lead Time : 4 - 6 weeks.

  • Manufacturer : Fisher

  • Model No. : 67CFR

  • Product type : 67CFR Series Instrument Supply Regulators

  • Body Sizes and End Connection : 1/4 NPT screwed

  • Body, Spring Case, and Dripwell : Aluminum

  • Filter : Cellulose or stainless steel or glass

  • Diaphragm and Valve Plug : Nitrile, fluoroelastomer (FKM), or silicone (do not use silicone with hydrocarbons)

  • Gasket : Composition

  • Maximum Inlet Pressure (Body Rating): 17.2 bar or 250 psig

  • Maximum Outlet (Casing) Pressure: 3.4 bar or 50 psi above outlet pressure setting

  • Bolting, Adjusting Screw, Locknut : Zinc-plated steel or Stainless steel

  • Shipping Weight : 3 Kg

RM1,144.00
  • Estimated Lead Time : 2 - 3 weeks.

  • Manufacturer : Fisher

  • Model No. : 67CFR-224

  • Product type : 67C Series Instrument Supply Regulators

  • Body and Spring Case : Aluminum (ASTM B85/Alloy 380)

  • Pusher Post and Valve Cartridge : Polyester resin

  • Upper Spring Seat : Zinc-plated steel

  • Lower Spring Seat, Diaphragm Plate : Chromate conversion coated Aluminum

  • Control Spring : Plated Steel or Inconel® (NACE)

  • Diaphragm and O-Rings : Nitrile (NBR), Fluorocarbon (FKM) or Silicone (VMQ)(

  • Soft Seat and Gaskets : Nitrile (NBR) or Fluorocarbon (FKM)

  • Bolting, Adjusting Screw, Locknut : Zinc-plated steel or Stainless steel

  • Shipping Weight : 3 Kg

RM619.00
  • Estimated Lead Time : 5 - 7 working days.

  • Manufacturer : Fisher

  • Model No. : 67CFR-225

  • Product type : 67C Series Instrument Supply Regulators

  • Body and Spring Case : Aluminum (ASTM B85/Alloy 380)

  • Pusher Post and Valve Cartridge : Polyester resin

  • Upper Spring Seat : Zinc-plated steel

  • Lower Spring Seat, Diaphragm Plate : Chromate conversion coated Aluminum

  • Control Spring : Plated Steel or Inconel® (NACE)

  • Diaphragm and O-Rings : Nitrile (NBR), Fluorocarbon (FKM) or Silicone (VMQ)(

  • Soft Seat and Gaskets : Nitrile (NBR) or Fluorocarbon (FKM)

  • Bolting, Adjusting Screw, Locknut : Zinc-plated steel or Stainless steel

  • Shipping Weight : 3 Kg

RM645.00
  • Estimated Lead Time : 1 - 2 weeks.

  • Manufacturer : Fisher

  • Model No. : 67CFR-226

  • Product type : 67C Series Instrument Supply Regulators

  • Body and Spring Case : Aluminum (ASTM B85/Alloy 380)

  • Pusher Post and Valve Cartridge : Polyester resin

  • Upper Spring Seat : Zinc-plated steel

  • Lower Spring Seat, Diaphragm Plate : Chromate conversion coated Aluminum

  • Control Spring : Plated Steel or Inconel® (NACE)

  • Diaphragm and O-Rings : Nitrile (NBR), Fluorocarbon (FKM) or Silicone (VMQ)(

  • Soft Seat and Gaskets : Nitrile (NBR) or Fluorocarbon (FKM)

  • Bolting, Adjusting Screw, Locknut : Zinc-plated steel or Stainless steel

  • Shipping Weight : 3 Kg

RM1,264.00
  • Estimated Lead Time : 5 - 7 working days.

  • Manufacturer : Fisher

  • Model No. : 67CFR-237

  • Product type : 67C Series Instrument Supply Regulators

  • Body and Spring Case : Aluminum (ASTM B85/Alloy 380)

  • Pusher Post and Valve Cartridge : Polyester resin

  • Upper Spring Seat : Zinc-plated steel

  • Lower Spring Seat, Diaphragm Plate : Chromate conversion coated Aluminum

  • Control Spring : Plated Steel or Inconel® (NACE)

  • Diaphragm and O-Rings : Nitrile (NBR), Fluorocarbon (FKM) or Silicone (VMQ)(

  • Soft Seat and Gaskets : Nitrile (NBR) or Fluorocarbon (FKM)

  • Bolting, Adjusting Screw, Locknut : Zinc-plated steel or Stainless steel

  • Shipping Weight : 3 Kg

RM619.00
  • Condition : Brand New
  • Warranty : 1 Year
  • Product Number : 67CFR-239
  • Manufacturer : Fisher
RM490.00
  • Estimated Lead Time : In stock. Usually ships in 3-10 working days

  • Manufacturer : Fisher

  • Product No. : 67CFR-600 

  • Product type : 67C Series Instrument Supply Regulator

  • 67CFR : with filter and soft seat internal relief

  • Body Size and End Connection Style : 1/4 NPT

  • Maximum Inlet Pressure (Body rating) : 250 psig / 17.2 bar

  • Maximum Emergency Outlet Pressure : 50 psi / 3.4 bar over outlet pressure setting

  • Pressure Registration : Internal

  • Shipping Weight : 3 Kg

RM765.00
  • Estimated Lead Time : 5 - 7 working days.

  • Manufacturer : Fisher

  • Model No. : 67CFR-601

  • Product type : 67C Series Instrument Supply Regulators

  • Body and Spring Case : Aluminum (ASTM B85/Alloy 380)

  • Pusher Post and Valve Cartridge : Polyester resin

  • Upper Spring Seat : Zinc-plated steel

  • Lower Spring Seat, Diaphragm Plate : Chromate conversion coated Aluminum

  • Control Spring : Plated Steel or Inconel® (NACE)

  • Diaphragm and O-Rings : Nitrile (NBR), Fluorocarbon (FKM) or Silicone (VMQ)(

  • Soft Seat and Gaskets : Nitrile (NBR) or Fluorocarbon (FKM)

  • Bolting, Adjusting Screw, Locknut : Zinc-plated steel or Stainless steel

  • Shipping Weight : 3 Kg

RM486.00
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Fisher

  • Product No. :

RM1,570.00
  • Estimated Lead Time : 4 - 6 weeks.

  • Manufacturer : Foxboro

  • Product No. : 876PH-TYAA-7M

  • Product Type : 876PH Intelligent Transmitter for pH, ORP, and ISE Measurement

  • 876PH = Intelligent Transmitter for pH, ORP, and ISE Measurement

  • Input and Output Communications : T = Analog Sensor Input with Digital HART and 4 to 20 mA Output

  • Enclosure Mounting : Y = Pipe Mounting (Horizontal or Vertical Pipe)

  • Electrical Safety : AA = ATEX intrinsically safe; II 1 G, Ex ia IIC, Zone 0.

  • Optional Selections : 7 = Storm Door (c)

  • Optional Selections : M = Detailed Instruction Manual (d)

  • Dimensions (HxWxD), approx. : 14.5cm x 10.4cm x 19.3cm

  • Shipping Weight : 8 Kg

RM8,944.00
  • Condition : Brand New

  • Warranty : 1 Year

  • Product Number : DVC6200

  • Manufacturer :Fisher

RM8,140.00
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Fisher

  • Product No : DVC6200-HC 

  • Product type :  FIELDVUE Digital Valve Controller Double Acting with Feedback and Mounting

  • Double Acting

  • Pneumatic signal, up to full supply pressure

    Minimum Span: 0.4 bar (6 psig)

    Maximum Span: 9.5 bar (140 psig)

    Action: Double

  • Fisher? FIELDVUE? DVC6200 Digital Valve Controller

  • Integral mounting to the Fisher GX Control Valve and Actuator System

  • Integral mounting to Fisher rotary actuators

  • Sliding-stem linear applications

  • Quarter-turn rotary applications

  • DVC6200 digital valve controllers can also be mounted on other actuators that comply with IEC 60534-6-1, IEC 60534-6-2, VDI/VDE 3845 and NAMUR mounting standards.

  • Connections

    Supply Pressure: 1/4 NPT internal and integral pad for

    mounting 67CFR regulator

    Output Pressure: 1/4 NPT internal

    Tubing: 3/8-inch recommended

    Vent: 3/8 NPT internal

    Electrical: 1/2 NPT internal or M20(6)

  • Actuator Compatibility

    Stem Travel (Sliding-Stem Linear)

    Minimum: 6.35 mm (0.25 inch)

    Maximum: 606 mm (23-7/8 inches)

    Shaft Rotation (Quarter-Turn Rotary)

    Minimum: 45_x0005_

    Maximum: 90|

  • Weight

    Aluminum: 3.5 kg (7.7 lbs)

  • Shipping Weight : 5 Kg

RM14,835.00
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Fisher

  • Product No. : DVC6200-HC (SINGLE ACTING)

  • Product Type : Digital Valve Controller

  • Available Mounting

    • Integral mounting to Fisher 657/667 or GX actuators

    • Integral mounting to Fisher rotary actuators

    • Sliding-stem linear applications

    • Quarter-turn rotary applications

  • Communication Protocol : HART 5 or HART 7

  • Input Signal

    • Point-to-Point

      • Analog Input Signal: 4-20 mA DC, nominal; split ranging available

      • Minimum Voltage Available at Instrument Terminals must be 9.5 VDC for analog control, 10 VDC for HART communication

      • Minimum Control Current: 4.0 mA

      • Minimum Current w/o Microprocessor Restart: 3.5 mA

      • Maximum Voltage: 30 VDC

      • Overcurrent protected

      • Reverse Polarity protected

    • Multi-drop.

      • Instrument Power: 11 to 30 VDC at 10 mA

      • Reverse Polarity protected

  • Supply Pressure

    • Minimum Recommended: 0.3 bar (5 psig) higher than maximum actuator requirements

    • Maximum: 10.0 bar (145 psig) or maximum pressure rating of the actuator, whichever is lower

  • Output Signal

    • Pneumatic signal, up to full supply pressure

    • Minimum Span: 0.4 bar (6 psig)

    • Maximum Span: 9.5 bar (140 psig)

    • Action: Double, Single Direct or Reverse

  • Vibration Testing Method : Tested per ANSI/ISA-S75.13.01 Section 5.3.5.

  • Humidity Testing Method : Tested per IEC 61514-2

  • Weight : 3.5 Kg

  • Shipping Weight : 5 Kg

RM13,545.00
  • Estimated Lead Time : 5 - 7 working days.

  • Manufacturer : Fisher

  • Product No : DVC6200HC 

  • Product type :  FIELDVUE Digital Valve Controller-Single action without feedback

  • Pneumatic signal, up to full supply pressure

    Minimum Span: 0.4 bar (6 psig)

    Maximum Span: 9.5 bar (140 psig)

    Action: Single Direct

  • Fisher? FIELDVUE? DVC6200 Digital Valve Controller

  • Integral mounting to the Fisher GX Control Valve and Actuator System

  • Integral mounting to Fisher rotary actuators

  • Sliding-stem linear applications

  • Quarter-turn rotary applications

  • DVC6200 digital valve controllers can also be mounted on other actuators that comply with IEC 60534-6-1, IEC 60534-6-2, VDI/VDE 3845 and NAMUR mounting standards.

  • Connections

    Supply Pressure: 1/4 NPT internal and integral pad for

    mounting 67CFR regulator

    Output Pressure: 1/4 NPT internal

    Tubing: 3/8-inch recommended

    Vent: 3/8 NPT internal

    Electrical: 1/2 NPT internal or M20(6)

  • Actuator Compatibility

    Stem Travel (Sliding-Stem Linear)

    Minimum: 6.35 mm (0.25 inch)

    Maximum: 606 mm (23-7/8 inches)

    Shaft Rotation (Quarter-Turn Rotary)

    Minimum: 45_x0005_

    Maximum: 90|

  • Weight (Aluminum): 3.5 kg (7.7 lbs)

  • Shipping Weight : 5 Kg

RM8,579.00
  • Estimated Lead Time : In stock. Usually ships in 7-10 working days.
  • Digital Valve Controllers
  • DOUBLE ACTING WITH FEEDBACK
  • Shipping Weight: 6.1 kg
RM10,062.00
  • Estimated Delivery Time: 7 Working days
  • Digital Valve Controllers
  • Shipping Weight: 6 kg
RM7,723.00
  • Estimated Delivery Time: 7 Working days
  • Digital Valve Controllers
  • Shipping Weight: 6.1 kg
RM7,723.00
  • Estimated Delivery Time: 7 Working days
  • Digital Valve Controllers
  • Shipping Weight: 6.1 kg
RM7,723.00
  • Estimated Delivery Time: 7 Working days
  • Digital Valve Controllers
  • Shipping Weight: 6.1 kg
RM7,723.00
  • Estimated Delivery Time: 7 Working days
  • Digital Valve Controllers
  • Shipping Weight: 6.1 kg
RM7,723.00
  • Estimated Delivery Time: 7 Working days
  • Digital Valve Controllers
  • Shipping Weight: 6.1 kg
RM7,723.00
  • Estimated Lead Time : In stock. Usually ships in 7-10 working days.

  • Digital Valve Controllers SINGLE ACTING WITH FEEDBACK

  • Area Classification : Explosion Proof, Intrinsically Safe, FISCO, Type N, Flame Proof, Non-incendive for FM

  • Certifications : CSA, FM, ATEX, IECEx, CUTR, Lloyd's Register, Peso, KGS, INMETRO, NEPSI, TIIS, Natural Gas Certified, Single Seal Device

  • Communication Protocol : 4-20 mA HART

  • Data Interface : Wired

  • Diagnostics : Yes

  • Input Signal : Electric

  • Max Outlet Pressure : 145 psig

  • Mounting Type : Integral Mounted

  • Operating Temperature : Standard Temperature, High Temperature

  • Position Control : Throttling Control, On/Off

  • Power Source : Local

  • Process Control : Flow, Pressure, Temperature, Level

  • Supply Media : Air, Natural Gas, Nitrogen

  • Other Configurations : Contact your local Emerson business partner or sales office to learn about additional specifications or options for this product.

  • Shipping Weight: 6.1 kg

RM10,139.00
  • Estimated Delivery Time: 7 Working days
  • Digital Valve Controllers
  • Shipping Weight: 6.1 kg
RM10,092.00
  • Condition : Brand New
  • Warranty : 1 Years
  • Product Number :DVC5010
  • Manufacturer :Fisher
RM6,544.60
  • Estimated Delivery Time: 7 Working days
  • 67CF Series Filter Regulators
  • Shipping Weight: 3.1 kg
RM555.00
  • Estimated Delivery Time: 7 Working days
  • 67CF Series Filter Regulators
  • Shipping Weight: 3.1 kg
RM555.00
  • Estimated Delivery Time: 7 Working days
  • 67CF Series Filter Regulators
  • Shipping Weight: 3.1 kg
RM761.00
  • Estimated Delivery Time: 7 Working days
  • 67CF Series Filter Regulators
  • Shipping Weight: 3.1 kg
RM894.00
  • Estimated Delivery Time: 7 Working days
  • 67CF Series Filter Regulators
  • Shipping Weight: 3.1 kg
RM555.00
  • Estimated Delivery Time: 7 Working days
  • Positioner
  • Shipping Weight: 6.1 kg
RM4,885.00
  • Estimated Lead Time : 1 - 2 weeks.

  • Manufacturer : Fisher

  • Product No. : FS3582I-75

  • Product Type : 3582i Positioners

  • Weight : 3.6 Kg

  • Shipping Weight : 6 Kg

RM8,742.00
  • Estimated Lead Time : 3 - 4 weeks.

  • Manufacturer : Fisher

  • Product No. : FS67CFR-239

  • Product type : 67C Series Pressure Regulator

  • Body Size, Inlet and Outlet Connection Style : 1/4" NPT

  • Set point : 50 PSI

  • Body, Spring Case, and Dripwell : Aluminum

  • Filter : Cellulose or stainless steel or glass

  • Diaphragm and Valve Plug : Nitrile, fluoroelastomer (FKM), or silicone (do not use silicone with hydrocarbons)

  • Gasket : Composition

  • Temperatures to 149_x0001_C or 300_x0001_F

  • Inlet Pressures to 17.2 Bar or 250 Psig

  • Maximum Outlet (Casing) Pressure: 3.4 bar or 50 psi above outlet pressure setting

  • Shipping Weight : 3 Kg

RM624.00
  • Estimated Lead Time : 4 - 5 weeks.

  • Manufacturer : Fisher

  • Product No. : GE58277X042

  • Product type : DVC6200S Mounting Kit

  • Shipping Weight : 5 Kg

RM2,610.00
  • Estimated Lead Time : 4 - 5 weeks.

  • Manufacturer : Fisher

  • Product No. :

RM2,245.00